Set up your mobile phone for GPRS

To operate a satellite Internet need to be 2 channels cell phone spyware: channel request and channel data acquisition. In the technology of one-way satellite Internet uses a satellite antenna (dish) to provide channel data acquisition. For the organization of the channel request the user can choose either option: the mobile phone which supports GPRS, LAN with Internet access, ADSL modem and so on. Because, more often, to organize the terrestrial channel used mobile phone, then stop on it. Thus, PRS (General Packet Radio Service) - a standard packet data radio, where the phone does not need to "dial up": The unit continuously maintains the connection, sends and receives data packets, using the free time-slots. Potentially GPRS-connection can have performance and 115 kbps, but in practice it is usually already mentioned 33-48 Kbps. The figure of 172.2 Kbps, which is found as one of the characteristics of GPRS, meaning only the theoretical performance of this service. It is attainable only if the machine has mobilized simultaneously, all eight possible time slots, so even without the use of error correction, and this, in practice, never happens. Most (as of 2003.) Supporting the work with GPRS mobile phones, now presented in the Russian market, belong to GPRS Class B. That is, they can operate in either GPRS, or traditional voice. This means that during a session of data transmission via GPRS (for example, when sending e-mail) when an incoming call the phone for a while suspended packet transfer to the owner failed to respond to a call in voice mode. True, user feedback indicates that in practice, in the mode of communication, some GPRS-Class B units do not always accept incoming calls. At the same time make calls and exchange data sets can be GPRS Class A. This GPRS Class A has some similarity with the consumer technology xDSL. Device is GPRS Class C can only work in one mode: or GPRS (data), or GSM (voice), and switching between modes is done manually. The class C are mainly specialized GPRS-modem for laptops and other devices designed to work with data.Therefore, depending on what class of GPRS-modem is used, the phone can receive calls both during the session and did not take. But as the GPRS-traffic outbound and is used only for the organization requests, it is quite possible that calls your phone can also take. So, we have a phone (which already service connected GPRS-Internet), there is a PC and a set of equipment with which we want to get online. The first thing we need to do - is establish a terrestrial link. Step 1. First you need to connect mobile phone to a computer (laptop). This can be done in the following ways: -With Data-cable to be connected to one of the COM or USB-ports on the computer; -C using infrared (IrDA) port; - Using the technology of Bluetooth. Since the most convenient, most fast and reliable way to connect your phone to your PC is a cable, it is most practical for many, will be precisely this connection option. To do this, buy the cord to sync your phone and PC, drivers are looking forward to it and, set up our terrestrial channel. It should be noted that in recent years (in particular, the phone company SonyEricsson, Nokia and other firms), the bundle includes a cable for synchronization and all the necessary drivers and utilities. Hence, the first thing you need - is to install a driver on the cable from the drive. Next, follow the instructions on the screen, connect the phone (may well have to restart the PC, for example, when installing software to work with SonyEricsson). Then, try to work the program. If the PC sees the phone and have the opportunity to make any of the data on your phone - it means all work performed correctly. The next step is the installation of new equipment - a modem, through which will be the connection (the modem is built-in mobile phone equipment). To do this you must use the "Add New Hardware" folder in Control Panel.  Next you need to manually select the type of equipment (modem) and install the driver (a program that ensures the operation of this equipment - the file extension INF). Drivers are on CD-ROM, which is usually included in the mobile phone). Also, drivers can be found on the web-site of the manufacturer of your mobile phone. During the driver installation, you must specify the appropriate connection method: -Serial port (COM port); -Infrared (IrDA) port; , Or through Bluetooth.   Step 3. After the driver installation is necessary in the properties of the modem initialization string to register. Below are the initialization strings for different models of phone operator MTS:  It is important to accurately enter and do not miss the characters, otherwise there may be problems in establishing the connection!   Step 4. Once you have successfully free cell spy software installed the modem, and specify the string to initialize it, you must create a new dial-up connection with an arbitrary name (for example, "GPRS"). In the process of creating not forget to select the modem (see step 2), which will be used when working on this connection. In this step, the number of the set: * 99 *** 1 #   Step 5. In the properties of new compounds remove the checkmark next to "Use country code and connection settings." After that a new connection is ready. When connecting to remember to specify the correct user name and password: Username (Login): mts Password (Password): mts Once made all the settings, you can start the session. Within a few seconds will create a remote connection, and you find yourself on the Internet.   General GPRS settings for all phones to access the Internet: APN: internet.mts.ru Login: mts Password: mts   For phones   GPRS settings for Windows XP customers Beeline GSM Locate the operating system, modem, and by clicking on its image, right click, choose Properties from the pop-up menu, select "Properties." Or, open the Control Panel and select Phone and Modem ", and in the window - the tab" Modem ", select installed modem and click Properties.

In the modem properties

In the modem properties, select the tab "Advanced Settings link" and enter the extra initialization commands with the name of the access point to GPRS (Access Point Name, and APN). To access the Internet through GPRS network Bee Line GSM additional initialization string as follows. cell phone spy You must enter all the characters without spaces. Some modems require the use of capital letters is, therefore, enter the string exactly as specified. Save the settings by pressing the "OK". Close the Phone and Modem Options by clicking the "OK". On this install and configure the modem is completed. Setting up a remote connection   Open the Network Connections window, selecting the "Start" menu select "Control Panel", and in the Control Panel - Network Connections. In the window that opens, select "Create a new connection cell phone spy softwrae download." In the New Connection Wizard, click Next. In the window, select the type of network connection, select "Connect to the Internet" and click "Next." Select "Set up my connection manually" and then click "Next." In the Select how you connect to the Internet, select "Connect using a modem" and click "Next". In the Select device mark just installed a modem that will be used for Internet access, and then click Next. Attention! Your modem at this point must be accessible to the operating system. For this phone to activate the infrared connection should be in front of the infrared port on your computer, PCMCIA-modem cell phone spy should be plugged into the appropriate slot on your computer, cable connected phone must be connected to the appropriate port, and with a modem connected via Bluetooth, the connection must be established . Otherwise, your modem will be unavailable and will not appear on the list. In the resulting window, enter the code name, which will be denoted by a custom connection (for example, BeeLineGPRS) and click Next. In the next window, enter the phone number to access services based on GPRS: Attention! Should be used just such a room and put all eight characters without spaces! This room (with an additional parameter "number of context", the relevant number listed in the modem initialization string) is perceived by almost all phone models. In the next window, select whether to create the connection available to all users of the computer, or just you, and then click Next. In the Settings window specify the details of the account settings: Username: beeline Password: beeline Also, at its option, leave or turn off the field labeled "Use the following name and user name and password when connecting any user", cell phone spy "Make this connection the connection to the Internet by default" and "Enable firewall for your Internet connection by default. Click "Next". In the final wizard window, you can also mark the box "Add a shortcut to connect to the desktop." Click "Finish". In the window "Connect to [name of the newly created attachment]" make sure that it displays the options that you previously entered when configuring the connection. Lifted up, click on "Properties". In the Properties window, set up the connection, make sure that in the "Connect using:" given your modem. GPRS settings to access the Internet and WAP for Megafon (Moscow region) 1. Setting Up Your Computer GPRS settings for your Internet access for Megafon (Moscow region)   For Internet access in Windows 95/98/2000, you must configure the Dial-Up Networking: 1. install and configure the software that came with the phone, in accordance with the instructions and recommendations of the phone manufacturer; 2.sozdat a mobile access point name is GPRS (APN) internet and activate the access point; 3.Connect phone to a computer; 4. select Start -> Programs -> Accessories -> Dial-Up Networking;5. in the Remote Access Network to choose New Connection; 6. enter the name of the new compounds, for example MegaFonGPRS; 7. choose a modem, the telephone, press the Next button; 8. enter the phone number * 99 *** 1 #, area code and country code left blank; 9. click the Next button in the next window, click Finish. Making a connection to connect to the Internet   In the Dial-Up Networking must select the previously created connection (eg MegaFonGPRS). In the Name field, enter gdata, in the Password field, enter gdata and click Connect. After some time a message appears stating that the connection to the internet. To complete the operation, press the End Communication cell phone spy. Way to connect your phone to a computer (eg serial port, infrared port, BlueTooth) depends on phone model and usually require the purchase of additional equipment, as recommended by the manufacturer the phone cell phone listening for free.